SOCS 14.57",15.75"W bed,11.18-1800 RPM,4"Bore,D1-11Spdl nose,(other size avail)   Our stock number: 410007

SOCS 14.57 ,15.75 W bed,11.18-1800 RPM,4 Bore,D1-11Spdl nose,(other size avail)

Brand New Colchester Engine Lathe 8116 VSJ #410007)

Make: Colchester Model: 8116 VSJ


Height of Center (in.): 11.02
Swing over Bed (in.): 21.81
Swing in Gap (in.): 32.68
Width in Front of Faceplate (in.): 8.50
Swing over Cross Slide (in.): 14.57
Bedway Width (in.): 15.75
Distance between Centers (in.): 80
Travel of Cross Slide (in.): 11.81
Width of Cross Slide (in.): 8
Travel of Top Slide (in.): 7.50
Width of Top Slide (in.): 6.80
Spindle Bore (in.): 4.09
Spindle Nose (Camlock): D1-11
Spindle Nose Taper:MT-5
Number of Spindle Speeds: 3
Spindle Speed Ranges (RPM):
Low Range: 18 - 200
Mid Range: 55 - 605
High Range: 100 - 1,800
Longitudinal Feed Range (in./rev.): 0.0016 - 0.11
Cross Feed Range (in./rev.): 0.0008 - 0.055
Number of lnch Pitches: 73
Range of Inch Pitches (TPI): 2 - 84
Number of Metric Pitches: 51
Range of Metric Pitches (mm): 0.2 - 14
Number of Diametral Pitches: 27
Range of Diametral Pitches (DP)L 8 - 72
Number of Module Pitches: 51
Range of Module Pitches (mm): 0.2 - 3.5
Tailstock Quill Travel (in.): 7
Tailstock Quill Diameter (in.): 3.74
Tailstock Quill Taper: MT-6
Spindle Motor: 15 HP,
208V/230V/3 Phase/60 Hz.
or 460V/3 Phase/60 Hz.,
Prewired: 230V

Shipping Dimensions (in./L x W x H): 140 x 51 x 51
Shipping Weight (lbs.): 6,283

• State of the art AC inverter variable speed spindle drive featuring surface mount technology
o give compact size and high reliability
• Infinitely variable spindle speeds, you can get the right spindle speed very quickly with a r
sponse like a CNC lathe, displayed on headstock
• Precision Gamet® tapered roller spindle bearings
• Electromagnetic spindle brake
• Three headstock gear ranges for a wide spread of constant power
- 33 to 1 - better than most CNC lathes
• Spindle bearings, gears and shafts are lubricated by a forced lubrication system
• Interlocked end guard door with easy access for maintenance and changing end train gear
• Leadscrew reversing box for faster thread cutting - reversal of the leadscrew with the spindl
running at low speed
• An easy-to-read index plate makes it simple to select the proper feed or threads
• Chuck guard with limit switch
• All bedways are induction hardened and precision ground
• Anti-friction carriage ways. Low-friction Moglice PTFE material between the saddle and bed fo
minimal bed wear and longer machine life
• Extra wide heavy-duty cast iron bed with triangular webs for exceptional torsional stiffness
nd excellent chip clearance
• Single piece leadscrew cover protects leadscrew from chips
• Heavyweight cast iron base provides the maximum support for the bed combined with sloping top
surfaces to prevent the accumulation of coolant
• Rapid power traverse to cross slide and carriage available from one lever mounted on saddle
• Saddle mounted chip guard and full rear splash guard
• Large capacity rollout wheeled chip bin for easy chip disposal
• Heavy duty tailstock with extra heavy-duty quill for excellent rigidity
• Model 8054VSJ shown
• Voltage requires 208V/230V/3 Phase/60 Hz. or 460V/3 Phase/60 Hz., prewired 230V

• Electromagnetic Spindle Brake
• Spindle Center Bushing
• (2) Morse Taper Centers
• Chuck Guard
• Leadscrew Cover
• Inch Threading Dial
• Forward/Reverse/Stop Switch
• Lockable Isolator Switch
• Emergency Stop Button
• One Shot Saddle and Cross Slide Lubrication
• Coolant System
• Full Rear Splash Guard
• Tool Kit
• Instruction and Parts Manual

OPTIONAL ACCESSORIES: Please call for more detail information
• 12" 3-Jaw Chuck
• 15" 3-Jaw Chuck
• 16" 4-Jaw Chuck
• 20" 4-Jaw Chuck
• 12" 6-Jaw Chuck
• 15" 6-Jaw Chuck
• 3/8" - 9" Steady Rest
• 6-1/8" - 15" Steady Rest
• Follow Rest
• 20" Slotted Face Plate
• 27" Slotted Face Plate
• Rapid Power Traverse to Cross Slide and Carriage
• Front Mount Handwheel 5C Collet Chuck
• Key Operated Collet Chuck
• Lever Operated Dead Length Collet Chuck
• One Position Carriage Stop
• Five Position Carriage Stop
• 4-Way Tool Post
• Turret Tool Post
• Quick Change Tool Post and Holders Set
• Live Center
• Work Light
• 5C Round Collet Set
• 5C Lever Type Collet Closer
• Telescopic Taper Attachment
• Tool Post Grinder
• Digital Readout System


Get a Quote

City St ZIP:

How did you hear of us?
Additional information on your request:

Please enter text from above:

RETURN to listing display       RETURN to our home page